P7RE Series
The P7 Series single packaged air conditioners are high efficiency self contained cooling units that can be installed on a slab. Heater kits are available as accessory items. Units are ETL and ETLc listed.
Weight |
297.0 Pound (lb.) |
Length |
51.5 Inches (in) |
Width |
37.0 Inches (in) |
Height |
31.0 Inches (in) |
Country of Origin |
USA |
UPC or Barcode |
663132306060 |
Hazardous Material |
No |
EPA Cert Required |
No |
Brand |
Frigidaire |
Equipment Type |
Straight Cool |
Tonnage |
3 1/2 |
Stage |
Single |
SEER |
14 |
EER |
11 |
Refrigerant |
R-410a |
CFM |
1400 |
Cooling Capacity |
40500 |
Air Flow |
Horizontal |
Voltage |
208-230 VAC |
Phase |
Single |
Cycle/Hertz |
60 |
Minimum Circuit Amps |
29.3 |
Maximum Fuse Size |
45 |
Blower Motor HP |
3/4 HP |
Condenser Motor HP |
1/4 HP |
Rated Load Amps |
17.9 |
Locked Rotor Amps |
112.0 |
Drive Type |
Direct Drive |
Certifications |
AHRI, Nate |
Color |
Brown |
Compressor |
Scroll |
Sound Level (dBA) |
76 |
Warranty Offered |
All Parts - 10 Years, Conditional Unit Replacement - 1 Year |
Energy Star Rated |
No |
ETL Certified |
No |
LEED Certified |
No |
UL Listed |
No |
UL Recognized |
No |
PIM Number |
1432714543842 |
Item ID |
351637 |
FEATURES and BENEFITS
Quality Compressor: State of the art compressor is standard equipment.
Hi Pressure Switches: Ensure long compressor life.
Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Eliminates corrosion.
ECM Blower Motor: Fixed torque energy efficient brushless DC ECM motor.
Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow.
Low Voltage Transformer: Includes 3 Amp fuse to protect low voltage circuit.
Liquid Line Filter Drier: Factory installed at a convenient location for service.
Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units.
Compact Footprint and Profile: Make the P7 Series easy to install and transport.
0" Clearance: To combustibles on duct side of the unit allows for installations in tight areas.
Wire Guard Coated with Earth Friendly Epoxy and Plastic Mesh Hail Guard. A guard that will never rust and protects the units coil from being damaged.
Raised Base Pan: Allows water to drain away from the unit.
Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Hi/low service ports allow access without disrupting operation..
Easy Access: To the evaporator coil for cleaning, blower assembly removal and general maintenance.
Drain Trap: Design optimizes drainage capabilities.
Removable Top Grille Assembly: Allows ease of service to the fan motor.
Optional Electric Heat: Field installed 5 - 20 KW.